 |
|
|
| |
|
|
|
|
|
|
- (4)
- (1)
- (2)
- (34)
- (5)
- (1)
- (4)
- (1)
- (1)
|
|
| |
|
|
Build Your Online Product Catalogs?
| Product Name: |
Forui jig machine for copper enrichment equipment
|
| Supply Ability: |
1000 sets |
| Related proudcts |
jig machine, copper enrichment, enrichment equipment, |
| Specifications |
LTA1515/2 |
| Price Term: |
FOB |
| Port of loading: |
Qingdao |
| Minimum Order |
1 set |
| Unit Price: |
6500USD |
|
In China, floatation separation has been used for most of copper miners. However, the coper content can be even 30% some times, and there are obvious copper granules, and considering the gravity separation of scheelite in Nigeria, Forui gives an idea of copper gravity separation for some copper ore.
Some copper mineral is fine inlay in the quartz rock with clear boundry and big specific gravity. For this kind of copper ore, gravity separation works really great to get final high grade copper concentrate with good efficiency and high recovery. And gravity separation here can work as rough separation or pre-separation of the copper ore by removing most of impurities, and this will lower the beneficiation cost when floatation separation is involved only.
However, if the copper is even and fine mixed in the ore, and the copper granules need milling to liberate or dissociate from the impurities, floatation separation will be a much better choice to get the ideal efficiency and great recovery. The flow sheet of milling--floatation separation--coarse re-milling is the one to separate the simple copper and Cu-Mo ore that is used most commonly. According to the nature of the copper ore, after the first-phrase milling, 40-70% of the ore will be about 200 meshes. Lots of tailings will be removed after the coarse separation & scavenging. The coarse concentrate will be remilling and the final copper concentrate will be gained after two or three election. For the first-step tailings can be deserted after the scavenging or back to the floatation recycling after concentrating again. And when the raw ore is of low grade, and large treatment capacity, the factory can achieve much profit. Besides, for the multi-milling, the copper and the pyrite can be easy to be liberated, so the concentrate from the floatation can be very good. The Dexing beneficiation factory has proved its reasonability of this flow sheet.
In sum, the most beneficiation methods for copper ore depends on the ore itself. For more information, contact m |
| Company: |
Gongyi Forui Machinery Factory
|
| Contact: |
Ms. Sera Song |
| Address: |
Opposite of Vehicle Mgt. Dpt, Heluo Rd, Gongyi City |
| Postcode: |
451200 |
| Tel: |
+86-15137815262 |
| Fax: |
+86-371-64391589 |
| E-mail: |
|
|
|
Home
