86exporter.com Home       Products Catalog      Suppliers Catalog      Log In        Sign up
      About Us
      Profile
      Products
      Contact Us


Gongyi Forui Machinery Factory

Products >> placer tin ore washing plant to enrich tin mineral

placer tin ore washing plant to enrich tin mineral

Build Your Online Product Catalogs?



Description
Product Name: placer tin ore washing plant to enrich tin mineral
Supply Ability: 1000 sets
Related proudcts tin ore washing,
Specifications 2LTC6109/8T
Price Term: FOB
Port of loading: Qingdao
Minimum Order 1 set
Unit Price: 24000USD

The concentration of alluvial tin ore is mainly gravity separation with mainly jigger, shaking table, and spiral chute involved while sometimes centrifugal separator is involved for some fine tin ore. Here is some tin enrichment flow sheet to share with you.

Firstly, the raw alluvial tin ore shall be screened into two size ranges and the specific size will depend on the ore itself. Here taking 2mm for example, the +2mm ore goes for rod mill to liberate the tin granules from impurities. -2mm ores will go for jigger for jigging separation. The first phase jigging is to get the tin to the largest extent while the second jigging separation is to upgrade tin as fine selection by removing the intergrowth of impurities. Concentrate from the second jigging can be final conconcentrate. Tailings from first jigging and +2mm tin ore goes for ball mill for further milling and the fine tin granules can be liberated, and the output from the rod mill will go for tin jig separation machine for further jigging. The tin concentrate from the final jigging can be final concentrate while the tailings can go for shaking table for separation to recover the fine tin.

2LTC6109/8T trapezoidal wash box/jig is also called side-moving jigger or side-moving diaphragm ore-washing machine. This machine belongs to side-moving pattern judging from its transmission part. It is a new-type diaphragm washbox/jigger.

2LTC6109/8T jig is kind of a large-scale diaphragm jigger designed by Gongyi Forui Machinery Factory. This jigger can deal with ore below 8mm with its treatment capacity up to 40t/h. It is widely used in the beneficiation of kinds of ores like hematite, limonite, specularite, manganese, antimony, mercury, placer gold, sand tin, tungsten-tin, fluorite, barite, celestite. And it is also used in the beneficiation of metals from kinds of smelting slag.

Contact Us
Company: Gongyi Forui Machinery Factory
Contact: Ms. Sera Song
Address: Opposite of Vehicle Mgt. Dpt, Heluo Rd, Gongyi City
Postcode: 451200
Tel: +86-15137815262
Fax: +86-371-64391589
E-mail:         


Copyright© Gongyi Forui Machinery Factory All Rights Reserved.
Tel : +86-15137815262 Fax : +86-371-64391589
Powered by 86exporter.com